ODM high pressure laboratory reactor

Specifications and Technical Parameters

Type

GSH-0.1~1

GSH-1~10

GSH-10~25

GSH-25~50

Volume(L)

0.1~1

1~10

10~25

25~50

Working pressure(MPa)

Negative pressure

-0.1~40

Negative pressure

-0.1~40

Negative pressure

-0.1~30

Negative pressure

-0.1~30

Working temperature(℃)

-196~500

Stirring speed(r/min)

20-1500

Motor power(W)

40~80

80~200

300~750

1100

Heating power(KW)

0.8~1

1~3

3~6

4~9

Heating type

Electric heating, water recycling, thermal oil, steam, far infrared heating.

Charging type

Charging from above, discharging from below or above.

Shaft

Adopt self-lubricating wear-resistant sleeve, suitable for mixing various media.

Stirring type

Paddle type or anchor type or as per customer request

Seal type

Magnetic seal, mechanical seal, packing seal.

Motor

GSH-0.1~10 general DC motor, GSH-10~50 DC servomotor or explosion-proof motor according to the customers’ requirements.

Main material

Contacting material inside kettle mainly use 0Cr18Ni9(304), 00Cr17Ni14Mo2(316L), 1Cr18Ni9Ti(321), also can be produced by titanium(TA2), nickel, zirconium, hastelloy, etc, or lined with PTFE, PPL, PFA and Ni (Ni6) according to different requirements of reaction media.

Opening port of conventional kettle lid

Needle Valve on Gas Port and Liquid Port, Bottom Insert Tube for sampling or inlet use, Pipe Plug on Solid Charging Port, Platinum Resistance (PT100) on measuring and controlling Temperature Port,Pressure Gauge and Safety Device (Blasting Disc)on Security Blasting Port, and Inlet and Outlet of Cooling Coil inside the reactor with tap.

Controller Device

Equipped with automatic or programmed PID or PLC to achieve:

Temperature display and control, accuracy ± 1 ℃ (or ±0.1 ℃);

Mixing Speed display and control;

Pressure display and control;

Level display and control;

Flow display and control;

Valve open/close control, etc.

Other Accessories

We can design and manufacture various reactors as per customer’s request. If user have other special requirements on kettle cover, kettle body opening, internal structure, stirring paddle, and other supporting device (such as condensate return unit, constant feeding tank, receiver, condenser, etc.), we can help customer to achieve their request, can also equip necessary instruments as request.